STANDARDS UPDATE CHART

ACTIVE STANDARDS
Std# Issue Date ANSI Date Standard Title
1001  2008  5/15/2009  Atmospheric Type Vacuum Breakers 
1002  2008  5/13/2009  Anti-Siphon Fill Valves for Water Closet Tanks 
1003  2009  1/19/2010  Water Pressure Reducing Valves for Domestic Water Distribution Systems 
1004  2008  10/8/2009  Backflow Prevention Requirements for Commercial Dishwashing Machines 
1008  2006  5/19/2006  Plumbing Aspects of Residential Food Waste Disposer Units 
1010  2004  5/24/2004  Water Hammer Arresters 
1011  2004  5/25/2004  Hose Connection Vacuum Breakers 
1012  2009  9/17/2009  Backflow Preventers with Intermediate Atmospheric Vent 
1013  2011  8/17/2011  Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers 
1014  2005  4/8/2005  Backflow Prevention Devices for Hand-Held Shower 
1015  2011  8/17/2011  Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies 
1016  2011  7/12/2011  ASSE 1016-2010/ASME A112.1016-2010/CSA B125.16-10 Automatic Compensation Valves for Individual Shower & Tub/Shower Combinations 
1017  2009  1/14/2010  Temperature Actuated Mixing Valves for Hot Water Distribution Systems 
1018  2001  7/25/2002  Trap Seal Primer Valves - Potable Water Supplied 
1019  2011  9/21/2011  Wall Hydrant with Backflow Protection and Freeze Resistance 
1020  2004  5/25/2004  Pressure Vacuum Breaker Assembly 
1022  2003  3/27/2003  Backflow Preventer for Beverage Dispensing Equipment 
1023  1979    Hot Water Dispensers Household Storage Type - Electrical 
1024  2004  5/25/2004  Dual Check Backflow Preventers 
1030  2009  4/22/2010  Positive Pressure Reduction Devices for Sanitary Drainage Systems 
1032  2011  8/9/2011  Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type 
1035  2008  9/17/2009  Laboratory Faucet Backflow Preventers 
1037  1990    Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures 
1044  2001  7/25/2002  Trap Seal Primer Devices - Drainage Types and Electronic Design Types 
1047  2011  8/17/2011  Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies 
1048  2011  8/17/2011  Double Check Detector Fire Protection Backflow Prevention Assemblies 
1049  2009  1/5/2010  Individual and Branch Type Air Admittance Valves for Chemical Waste Systems 
1050  2009  1/5/2010  Stack Air Admittance Valves for Sanitary Drainage Systems 
1051  2009  1/5/2010  Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems 
1052  2004  5/25/2004  Hose Connection Backflow Preventers 
1053  2004    Dual Check Backflow Preventer Wall Hydrants - Freeze Resistant Type 
1055  2009  12/2/2009  Chemical Dispensing Systems 
1056  2001  7/25/2002  Spill Resistant Vacuum Breakers 
1057  2001    Freeze Resistant Sanitary Yard Hydrants with Backflow Protection 
1060  2006  4/17/2006  Outdoor Enclosures for Fluid Conveying Components 
1061  2011  6/17/2011  Push-Fit Fittings 
1062  2006  11/6/2006  Temperature Actuated, Flow Reduction (TAFR) Valves for Individual Supply Fittings 
1063  2008  10/13/2008  Air Valve and Vent Inflow Preventer 
1064  2011  8/17/2011  Backflow Prevention Assembly Field Test Kits 
1066  1997    Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings 
1069  2005  4/8/2005  Automatic Temperature Control Mixing Valves 
1070  2004  5/25/2004  Water Temperature Limiting Devices 
1071  2008    Temperature Actuated Mixing Valves for Plumbed Emergency Equipment 
1072  2007    Barrier Type Floor Drain Trap Seal Protection Devices 
1079  2005    Dielectric Pipe Union 
5000  2009  6/30/2009  Cross Connection Control Professional Qualifications Standard 
6000  2006  5/19/2006  Professional Qualifications Standard for Medical Gas Installers, Inspectors, Verifers, Maintenance Personnel & Instructors 
7000  2008  7/1/2009  Professional Qualifications Standard for Plumbing-Based Residential Fire Protection Systems Installers & Inspectors 
8000  2010  3/2/2011  Self-Contained Breathing Apparatus Replenishment Systems Installers, Inspectors & Verifiers Professional Qualifications Standard 
10000  2010  3/9/2011  Professional Qualifications Standard for Green Plumbing Systems Installers 

DRAFT STANDARDS
Std# Standard Title WG Chair Comments
1002  (Draft) Anti-Siphon Fill Valves for Water Closet Tanks    Holding WG applications until harmonization group meets 
1008  (Draft) Household Food Waste Disposer Units    1st Quarter 2012 - assemble working group 
1010  (Draft) Water Hammer Arresters    Task group drafting changes - then ballot WG 
1011  (Draft) Hose Connection Vacuum Breakers    PSC Chairman reviewing ballot comments 
1014  (Draft) Backflow Prevention Devices for Hand-held Shower    1st Quarter 2012 - assemble working group 
1018  (Draft) Trap Seal Primer Valves - Potable Water Supplied    Holding WG applications until harmonization group meets 
1020  (Draft) Pressure Vacuum Breaker Assembly    1st Quarter 2012 - assemble working group 
1022  (Draft) Backflow Preventer for Beverage Dispensing Equipment    compiling draft & minutes then ballot working group 
1023  (Draft) Hot Water Dispensers Household Storage Type Devices    scheduling initial WG meeting 
1024  (Draft) Dual Check Backflow Preventers    1st Quarter 2012 - assemble working group 
1037  (Draft) Pressurized Flushing (Flushometers) for Plumbing Fixtures    Holding WG applications until harmonization group meets 
1044  (Draft) Trap Seal Primer Devices - Drainage Types and Electronic Design Types    WG ballots due January 18, 2012 
1052  (Draft) Hose Connection Backflow Preventers    1st Quarter 2012 - assemble working group 
1053  (Draft) Dual Check Backflow Preventer Wall Hydrants - Freeze Resistant Type    1st Quarter 2012 - assemble working group 
1056  (Draft) Spill Resistant Vacuum Breaker    WG ballots & comments forwarded to WG chairman 
1057  (Draft) Freeze Resistant Sanitary Yard Hydrants with Backflow Protection    WG ballots & comments forwarded to WG chairman 
1060  (Draft) Outdoor Enclosures for Fluid Conveying Components    next WG meeting - January 12, 2012 
1062  (Draft) Temperature Actuated, Flow Reduction (TAFR) Valves for Individual Supply Fittings    1st Quarter 2012 - assemble working group 
1066  (Draft) Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings    compiling 2007 comments & revising Draft F for WG meeting 
1069  (Draft) Automatic Temperature Control Mixing Valves    1st Quarter 2012 - assemble working group 
1070  (Draft) Water Temperature Limiting Devices    Holding WG applications until harmonization group meets 
1071  (Draft) Temperature Actuated Mixing Valves for Plumbed Emergency Equipment    reviewing resolution report from chairman 
1072  (Draft) Barrier Type Floor Drain Trap Seal Protection Devices    1st Quarter 2012 - assemble working group 
1079  (Draft) Dielectric Pipe Union    PSC Chairman reviewing ballot comments 
7000  (Draft) Professional Qualifications Standard for Plumbing-Based Residential Fire Protection Systems Installers & Inspectors  Murray  ballot to PQSC failed. Draft sent back to working group. 
9000  (Draft) Firestop Systems & Smoke-Limiting Materials Professional Qualification Standard  Kool  The 9020 section of the Standard was balloted and passed. All comments were addressed and sent to the working group for review. Meeting was held 10/12/2011 via WebEx.. Specific tasks were assigned to be completed before the next meeting is scheduled. 
11000  (Draft) High Purity Piping Systems Professional Qualifications Standard  Silber  Working group comments being addressed by chairman. 
12000  (Draft) Professional Qualifications Standard for the Health and Safety of Plumbers and Pipetrade Professionals  Murray  First meeting was held on 3/24/2011 (WebEX). WG members are working on specific tasks and reviewing the document. 
13000  (Draft) Professional Qualifications Standard for Service Plumbing    Initial draft is complete. A working group is now forming. 
15000  (Draft) Fire Sprinkler Systems Professional Qualifications standard  Driebel  Working group comments being addressed by Chairman. 
16000  (Draft) Plumbing Inspector Professional Qualifications Standard  Ribbs  Draft sent to the PQSC on 11/29/2011 with a due date of 12/20/2011. Draft was approved. Ballot wIll now be sent to the Board of Directors. 
17000  (Draft) Mechanical Inspector Professional Qualifications Standard  Ribbs  Working group met on 1/8/2012 in Phoenix , AZ. Draft was reviewed and changes were made. 
DRAFT 6000 - (Draft)  Professional Qualifications Standard for Medical Gas Systems Personnel    Working Group meeting scheduled for March 7 & 8, 2012 in Cleveland, OH 

INACTIVE STANDARDS
Std# Issue Date ANSI Date Standard Title Comments
1006  1986    Residential Use Dishwashers   
1007  1986    Home Laundry Equipment   
1009  1990    Commercial Food Waste Grinder Units   
1021  2001    Drain Air Gaps for Domestic Dishwasher Applications