ASSE International Working Groups Forming


Product Standards


  • ASSE 1008, Performance Requirements for Plumbing Aspects of Residential Food Waste Disposer Units
  • ASSE 1010, Performance Requirements for Water Hammer Arresters
  • ASSE 1014, Performance Requirements for Backflow Prevention Devices for Hand-Held Showers
  • ASSE 1018, Performance Requirements for Trap Seal Primer Valves – Potable Water Supplied
  • ASSE 1020, Performance Requirements for Pressure Vacuum Breaker Assembly
  • ASSE 1023, Performance Requirements for Hot Water Dispensers Household Storage Type - Electrical
  • ASSE 1032, Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type
  • ASSE 1053, Performance Requirements for Dual Check Backflow Preventer Wall Hydrants – Freeze Resistant Type
  • ASSE 1064, Backflow Prevention Assembly Field Test Kits
  • ASSE 1066, Performance Requirements for Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings
  • ASSE 1069, Performance Requirements for Automatic Temperature Control Mixing Valves
  • ASSE 1072, Performance Requirements for Barrier Type Floor Drain Trap Seal Protection Devices


  • Professional Qualifications Standards


  • ASSE Series 6000, Professional Qualifications Standard for Medical Gas Systems Personnel
  • ASSE Series 7000, Professional Qualifications Standard for Residential Potable Water Fire Protection Systems Installers & Inspectors for One and Two Family Dwellings
  • ASSE Series 16000, Professional Qualifications Standard for Plumbing & Mechanical Inspectors and Plans Reviewers
  • ASSE Series 18000, Fuel Gas Systems and Equipment Installers and Repairers
  • ASSE Series 22000, Professional Qualifications Standard for Water Treatment Equipment Personnel




  • If you are interested in applying for a working group, please fill out a working group application below.
  • Download a Working Group Application.

    For Professional Qualifications Standards, send your completed application to the professional qualifications coordinator.
    For Product Standards, send your completed application to the staff engineering group.

    Working groups are for Product Standards that are four years or older, Professional Qualifications Standards, and any new standards. For revising product standards newer than four years old, consider creating or joining a Project Team.